Canon LBP 660 Service Manual - Page 236
Before You Install this Software
View all Canon LBP 660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Before You Install this Software Before you install the Microsoft Windows Printing System on your PC running Microsoft Windows NT, check that your PC meets the hardware and software requirements listed below. ½ IBM-PC or compatible machine with a Pentium 90 MHz CPU or better and with Microsoft Windows NT 4.0 (for Servers or Workstations) installed. ½ The Microsoft Windows Printing System for the LBP-660 described in this guide runs on Microsoft Windows NT version 4.0 for PC/AT-compatible machines. This Microsoft Windows Printing System will not run on systems running Microsoft Windows NT version 3.51 or earlier or Microsoft Windows NT for a RISC-based processor. ½ If you are using a Novell NetWareă network, you cannot install this software on a NetWareă server. You cannot use this software to print from Novell Netwareă clients for Microsoft Windows 95, Microsoft Windows 3.1, or Microsoft Windows for Workgroups. ½ Minimum 24 MB of RAM ½ Minimum 10 MB of available hard disk space ½ CD-ROM drive ½ Standard Centronics parallel printer port (when the LBP is connected as a local printer) ½ Network interface card (when the LBP is shared on a network) While it may be possible to install the Microsoft Windows Printing System on computers that do not meet the above requirements, Canon cannot guarantee that the software will run properly. To provide the optimum environment and obtain the best possible performance from your LBP-660, the following hardware and software is recommended: ½ Pentium 166 MHz CPU or better ½ Minimum 48 MB of RAM ½ ECP printer port ½ Sound card (required for using voice messages in the Microsoft Windows Printing System) To share the LBP-660 across a network, one of the following network protocols must be installed: ½ NetBEUI ½ TCP/IP ½ NWLink IPX/SPX ½ To install the Microsoft Windows Printing System for Microsoft Windows NT, you must have Administrator privileges. The installation should be performed by a network administrator or printer manager with Administrator privileges. 2 Introduction Chapter 1