Canon LE-5W WH User Manual - Page 92
The image does not display properly, Power shuts down, Execute the AUTO PC function.
View all Canon LE-5W WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
The image does not display properly Cause The image shifts left or right with analog PC inputs. Also, the image flickers. The image is top/bottom reversed or left/right reversed. Remedy Execute the AUTO PC function. There is a problem with the ceiling mounting/rear projection feature setup. Using a computer cable in which some of the pins do not connect. Check the setting details for Setup > Advanced > Projector Position. (P63) Use the connector cable included with the projector. Power shuts down Cause The air intake vents or exhaust vents are blocked. For commercially available parts, use a computer cable in which all of the pins connect. Remedy If the air intake vents or exhaust vents are blocked, the temperature inside the projector will rise and the projector will automatically shut down for protection. (P20) Improper operating environment. After the temperature of the projector drops, and the air intake vents and exhaust vents are unblocked, turn it on again. Check that the operating environment is 0°C to 40°C. (P16) When the causes for the above cannot be found. When using the projector in a high altitude location between 1500 m to 3000 m, set it to the high altitude mode. (P62) Technical problems may occur so unplug the power cord. Contact your Canon Customer Support Center as soon as possible. (Back cover of this manual) Appendix 92