Canon LV-5220 /app/pdf/projector/lv5220-7220-7225_manual.pdf - Page 30

Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the PC Adjust Menu icon. 2 Press the Point d button to move the red frame pointer to the item that you want to adjust and then press the SET button. An adjustment dialog box will appear. Press the Point 7 8 button to adjust value. Fine sync Eliminates flicker from the image displayed. Press the Point 7 8 button to adjust value. (From 0 to 31) Total dots Adjusts the number of total dots in one horizontal period. Press the Point 7 8 button and adjust number to match your PC image. PC Adjust Menu PC Adjust Menu icon Move the red frame pointer to an item and press the SET button. Shows status Selected Mode (Stored / Free) of the selected Mode. Horizontal Adjusts horizontal picture position. Press the Point 7 8 button to adjust the position. Vertical Adjusts vertical picture position. Press the Point 7 8 button to adjust the position. Current mode Press the SET button to show H-Freq. and V-Freq. of the connected computer. Press the Point 7 8 button to adjust the value. Press the SET button at this icon to adjust the other items. Clamp Adjusts clamp level. When the image has dark bars, try this adjustment. Current mode Press the SET button at the Current mode icon to show the information of the connected computer. 30