Canon LV-5220 /app/pdf/projector/lv5220-7220-7225_manual.pdf - Page 35

Video Input Input Source Selection (Video, S-Video) Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Video Computer 1 Computer 2 ✳ VIDEO button Video ✳ See Note on the bottom of this page. Menu Operation 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. 2 Press the Point d button to move the red arrow pointer to Video and then press the SET button. The Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press the SET button. Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1st S-Video 2nd Video The S-VIDEO jack has priority over the VIDEO jack under the condition of connecting both the S-VIDEO jack and the VIDEO jack. Video When video input signal is connected to the VIDEO jack, select Video. S-Video When video input signal is connected to the S-VIDEO jack, select S-Video. Input Menu Input Menu icon VIDEO Move the pointer to Video and press the SET button. Source Select Menu (VIDEO) Move the pointer to the source that you want to select and press the SET button. Video Input ✔Note: When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. (p44) 35