Canon LV-7245 User Manual - Page 31
(3) Adjusting the Picture Size and Position, Adjust the Tilt Foot
View all Canon LV-7245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3. Projecting an Image (Basic Operation) ᕣ Adjusting the Picture Size and Position Place your projector on a flat level surface and ensure that the projector is square to the screen. Lift the front edge of the projector to center the image vertically. * If the projected image does not appear square to the screen then use the FOCUS ZOOM Keystone feature for proper adjustment. See page 25 to 26. AC IN Move the projector left to center the image horizontally on the screen. ZOOM FOCUS AC IN Adjust the Tilt Foot 1. Lift the front edge of the projector. 2. Push up the Adjustable Tilt Foot Levers on the right and left sides 1 of the projector to extend the adjustable tilt feet (maximum height). 2 AUTO PC COMPUTER-1 COMPUTER-2 S-VIDEO POWEWRARLNAIMNPGREPLACE VIDEO +VOL -VOL ZOOM FOCUS Adjustable Tilt Foot Lever Adjustable Tilt Foot 3. Push down the Adjustable Tilt Foot Levers. 4. Lower the front of the projector to the desired height and release the Adjustable Tilt Foot Lever to lock the Adjustable tilt foot. There is approximately 10 degrees of up and down adjustment for the 4 front of the projector. 3 CAUTION Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector. FOCUS ZOOM COMPUTER-1 COMPUTER-2 S-VIDEO AUTO PC POWEWRARLNAIMNPGREPLACE VIDEO +VOL -VOL 2 Adjustable Tilt Foot Lever 4 23