Canon LV-7245 User Manual - Page 36

3. Projecting an Image (Basic Operation) ᕧ Turning off the Projector To turn off the projector: First, press the POWER button on the projector cabinet or the OFF button on the remote control. The "Power Off / OK?" message will appear. LAMP REPLACE WARNING POWER VIDEO S-VIDEO COMPUTER-1 COMPUTER-2 VOL VOL - + AUTO PC Secondly, press the OK button or press the POWER or the OFF button again. The POWER indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds (Cooling-off time). Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 seconds. Finally, turn off the Main Power switch. The power indicator will go out. Power On LAMP REPLACE WARNING POWER Steady green light OFF POWER NO SHOW D.ZOOM PAGE MENU BACK Fan running LAMP REPLACE WARNING POWER Blinking orange light Standby LAMP REPLACE WARNING POWER Steady orange light CAUTION Do not unplug the power cord from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector: • While the Hour Glass icon appears. • While the cooling fans are running. (The cooling fans continue to work for 30 seconds after the projector is turned off) • While the lamp is lighted. FOCUS ZOOM VOL+ VOL- AC IN ᕨ After Use Preparation: Make sure that the projector is turned off. 1. Unplug the power cord. 2. Disconnect any other cables. 3. Retract adjustable tilt feet if extended. 4. Cover the lens with the lens cap. 5. Put the projector and its accessories in the supplied soft case. 28