Canon LV-7575 LV-7575_inst_manual.pdf - Page 20

BASIC OPERATION TURNING ON / OFF PROJECTOR TURNING ON THE PROJECTOR 1 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. 2 Connect the projector's AC power cord into an AC outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. 3 Press the POWER button on the top control or on the remote control unit. The LAMP indicator dims, and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts. 4 After the countdown, the input source that was selected the last time and the Lamp mode status icon (see page 41) appear on the screen. 30 The preparation display disappears after 30 seconds. Selected Input Source and Lamp mode Lamp mode status If the projector is locked with a PIN code, a PIN code Input Dialog Box appears. Enter the PIN code as instructed below. To Enter a PIN code Select a number by pressing the POINT LEFT/RIGHT button and fix the number with the OK button. The number changes to "✳." If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the POINT DOWN button, then return to "PIN code." Enter the correct number. Repeat this step to complete entering a four-digit number. When the four-digit number is fixed, the pointer automatically moves to "Set." Press the OK button so that you can start to operate the projector. If you entered a wrong PIN code, "PIN code" and the number turn red and disappear. Enter a PIN code all over again. PIN code Input Dialog Box After the OK icon disappears, you can operate the projector. Pointer What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit number. Refer to the PIN code lock function in the SETTING Menu on page 43 for locking operation of the projector with your PIN code. 20