Canon LV S3 Serial Functional Specification - Page 12

7.25 Brightness+ Command Command "C20" [CR] Detail Brightness of user control +1 Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 7.26 Brightness- Command Command "C21" [CR] Detail Brightness of user control -1 Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 7.27 Image (Toggle) Command Command "C27" [CR] Detail Switch Image setting status. This command works the same as the remote control's "Image" button or the key on the projector body. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 7.28 Power Management Ready Command Command "C2A" [CR] Detail Set Power Management to Ready This status is stored in EEPROM, so even if turning off and on. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 7.29 Power Management OFF Command Command "C2B" [CR] Detail Set Power Management to OFF mode. This status is stored in EEPROM, and even if turning OFF and ON. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 7.30 Power Management Shut Down Command Command "C2E" [CR] Detail Set Power Management to Shut down mode. This status is stored in EEPROM, and even if turning OFF and ON. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] Page 12/21