Canon LV S3 Serial Functional Specification - Page 8
Operation Requirements, Power ON Command, 6 Power OFF Command, Quick Power OFF, 7 Power OFF Command
View all Canon LV S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7.4 Operation Requirements When the projector's status in this below, functional execution commands are limited. Status Read Commands are available even in this table status. Projector Status StandBy Mode Processing Countdown Processing Cooling Down Processing Cooling Down due to abnormal temperature. Abnormal Temperature Status Processing Mode Change Processing Power Save/Cooling Down Processing Power Save Available Functional Execution Commands C00: Power ON C00: Power ON (Terminate Countdown) N/A N/A N/A N/A N/A C00: Power ON C01: Power OFF Note) When the status is above, even if the projector receives other command in the above status, the projector returns [ACK] [CR]. 7.5 Power ON Command Command "C00" [CR] Detail Power ON When already Power ON, no need to do. When sending this command during processing Count Down, Count Down is terminated. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 7.6 Power OFF Command Quick Power OFF Command "C01" [CR] Detail Power OFF (Stand By) When Power OFF with ON-OFF button of the projector or the remote control, "Power OFF" will be displayed. However, as soon as this command is sent, Quick Power OFF is executed. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] 7.7 Power OFF Command Command "C02" [CR] Detail Power OFF (Stand By) When Power OFF with ON-OFF button of the projector or the remote control, "Power OFF" will be displayed. However, as soon as this command is sent, Power OFF is executed. Acceptable Response [ACK] [CR] Unacceptable "?" [CR] Page 8/21