Canon LX-D5500 Users Guide - Page 187
Monitor's [Cancel Print Job], correct position.
View all Canon LX-D5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
List of Error Messages/Warning Messages Error Message Paper empty X ("X" represents number). Paper Length different X ("X" represents number) Paper Width different Paper jam XX ("XX" represents numbers) Error Content The paper has run out. Or the paper is not fed. Handling Load a paperʢ. ˠ P.16ʣ The length of the paper that is set differs from the paper size configured by the application software or printer driver. If the paper is different, replace with the proper paper. If the application software or printer driver's configuration is different, click on the Status Monitor's [Cancel Print Job] and print again after correctly configuring the paper size. The width of the paper that is set differs from the paper size configured by the application software or printer driver. If the paper is different, replace with the proper paper. If wrong paper is loaded or the paper guide is out of position, replace with correct paper or move the paper guide to the correct position. If the application software or printer driver's configuration is different, click on the Status Monitor's [Cancel Print Job] and print again after correctly configuring the paper size. The transport area, rear feeder slot, or paper delivery slot is clogged with paper. Remove the paper jam and reload the paperʢ. ˠ P.177ʣ If the same error occurs again, update the printer drivers and firmware to the latest versions. 183