Canon MF7280 imageCLASS MF7280 Sending Guide - Page 106
Different Size Originals
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Different Size Originals This mode enables you to scan different size originals together. IMPORTANT • The Different Size Originals mode cannot be used with the Document Size or Stamp mode. • If the originals are placed in the feeder, make sure that the different size originals are of the same weight (paper type). • Align the top edge of the originals with the back edge of the feeder or the platen glass if you are placing originals with different widths. ("Width" refers to the vertical measurement of the paper from the front of the machine to the back of the machine when the paper is 3 placed in the feeder or on the platen glass.) Scanning Features • Set different size originals in the following combinations. Other combinations may damage the originals. - 11" x 17" and LGL, LTR and LGL, LTR and LTRR • If you place originals with different widths into the feeder, the originals may move slightly when fed to the scanning area. As a result, the images may be scanned as slanted. • If the Different Size Originals mode is set, the scanning speed may be slower than normal. 1 Place your originals ➞ specify the destination. NOTE • For instructions on placing your originals, see "Placing Originals," on p. 1-31. • For more information on specifying the destination, see Chapter 2, "Basic Sending Methods." 2 Press the Scan Settings drop-down list ➞ press [Option]. If necessary, see the screen shot in step 2 of "Color," on p.3-5. Scan Settings 3-21