Canon Macro Ring Lite MR-14EX II Instruction Manual - Page 20

Turning on the Power 1 Set the power switch to . X The flash recycling starts. X During recycling, is displayed on the LCD panel. When flash recycling is completed, this indicator disappears. 2 Check that the flash is ready. The state of the flash-ready lamp changes from off to green (Quick flash ready) to red (fully charged). Press the test flash button (flashready lamp) to fire a test flash. Quick Flash The Quick flash function enables flash shooting when the flash-ready lamp is lit green (before the flash is fully charged). It is available when the camera's drive mode is set to single shooting. The flash output will be approx. 1/2 to 1/5 of the full output, but it is effective for shooting with a shorter firing interval. Note that you cannot use Quick flash when continuous shooting, FEB, manual flash, or wireless multiple flash shooting is set. Auto Power Off To save battery power, the power will turn off automatically after approx. 90 sec. of idle use. To turn on the MR-14EX II again, press the camera's shutter button halfway, or press the test flash button (flash-ready lamp). Quick flash cannot be used when the flash mode is set to . A test flash cannot be fired when the camera's 3/1/4/7/2 timer is active. 18