Canon Macro Twin Lite MT-24EX MACRO RING LITE MR-14EX/MACRO TWIN LITE MT-24EX - Page 29
Manual Exposure
View all Canon Macro Twin Lite MT-24EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
q Manual Exposure You can set the flash output manually from full output at 1/1 to 1/64 output in full-stop increments. The flash can be fired in one of three ways: 1. A and B fired at the same output, 2. A and B fired at a different output, 3. Only A or B is fired. You should first take a test shot to check the exposure. Firing A and B at the Same Flash Output 1 Select . Press the button to display . 2 Set the flash output. Press the button. X The flash output blinks. Press the or button to set the flash output. X Each time you press the button, the flash output will increase/decrease by 1 stop. Press the button. X The flash output is displayed. Firing A and B at a Different Flash Output For step 2 above, follow the procedure below to set a different flash output for A and B. 1 Press the button to display . 2 Select the flash tube/head. Press the button to select , and the button to select . 3 Set the flash output. Press the or button to set the flash output. Pressing the button to set the flash output to "--" will set only the other flash tube/head to fire. X The setting after 1/64 is "--". The flash tube/head whose flash output has been set to "--" will not fire. 27