Canon Macro Twin Lite MT-24EX MACRO RING LITE MR-14EX/MACRO TWIN LITE MT-24EX - Page 35
Face the slave unit C's sensor toward - instructions
View all Canon Macro Twin Lite MT-24EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
1 Set the MR-14EX or MT-24EX as the master unit. Press the button to select . Press the button to select . X will be displayed. Press the button to select a channel 1 to 4. 2 Set the slave unit. Set the same channel as with the master unit. Set the ID to . As for the setting procedure, refer to the slave Speedlite's instruction manual. 3 Position the slave unit(s). Face the slave unit C's sensor toward the master unit. Do not put any obstructions between the master unit and slave unit(s) C. 4 Check that the flash is ready. When the slave unit(s) C is ready to fire, the AF-assist beam will blink for 1 sec. 33
33
1
Set the MR-14EX or MT-24EX as
the master unit.
Press the <
D
> button to select
<
a
>.
Press the <
f
> button to select
<
yk
>.
<
w
> will be displayed.
Press the <
e
> button to select a
channel 1 to 4.
2
Set the slave unit.
Set the same channel as with the
master unit.
Set the ID to <
C
>.
As for the setting procedure, refer to
the slave Speedlite’s instruction
manual.
3
Position the slave unit(s).
Face the slave unit C’s sensor toward
the master unit.
Do not put any obstructions between
the master unit and slave unit(s) C.
4
Check that the flash is ready.
When the slave unit(s) C is ready to
fire, the AF-assist beam will blink for 1
sec.