Canon PC150 PC150 Operator's Manual - Page 15

Getting Started REQUEST: Carrying the Copier by • Make sure that the trays are set correctly under the disc on the platen cover. • Double check to make sure the trays are set correctly under the disc on the platen cover. the Sides Standing behind the copier as shown in the illustration, firmly grasp the front and rear sides of the copier and lift. • If transporting the copier over a long distance secure the platen cover with packing tape and remove the cartridge. (See p.14.) Secure the platen with packing tape. 1 • When transporting the copier take extra care not to subject it to vibrations or shock. • If you need to set the copier down for a while, place it upright on a flat level surface with the carrying handle on top. Push in the carrying handle. Then fold up the trays. • When lowering the copier to a horizontal position (installation position), do so slowly. Transporting the Copier Insert the trays into the opening between the disc and the platen cover. REQUEST: • Do not attempt to use the paper feeding slot, exit slot, multi-stack tray or the copy tray as handles. Attempting to carry the copier by holding one of these may cause it to break off, and thus cause the handler to drop and damage the copier. 01/ PC150-USA 13 13 5/11/04, 4:53 PM