Canon PC160 PC150 Operator's Manual - Page 50
Problem, Possible Cause, Possible Remedy
UPC - 013803056112
View all Canon PC160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Troubleshooting What to Do If You Suspect There is a Malfunction If you suspect there is a malfunction with your copier, before calling a service representative, check the list below to see if you can solve the problem yourself. Problem Possible Cause Possible Remedy Copier will not operate. 3 The plug is not connected properly to the outlet. The power switch is OFF. Re-connect the power plug. Turn the power switch ON. Power will not turn ON / Power cuts off The top cover is open. during copying. Press the button and close the top cover firmly. The left cover is open. Press the middle of the left cover to close it securely. No copy image appears on copies. No original is set on the platen glass. Set an original on the platen glass. (See p.32. ) There is no cartridge installed. Install a cartridge (See p.21.) The sealing tape was not removed from the cartridge. Remove the sealing tape from the cartridge . (See p.21.) The copy exposure is not adjusted properly. Adjust the copy exposure. (See p.32.) What to Do If You Suspect There is a Malfunction 48 03/ PC150-USA 48 5/11/04, 4:56 PM