Canon PC160 PC150 Operator's Manual - Page 52
Copy Image, Problems
UPC - 013803056112
View all Canon PC160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Troubleshooting Copy Image Problems If copies appear either too dark or too light and you can not get a clear copy, refer to the guidelines below. If Light Bands/ White Streaks Appear on Copies If Dark Bands/ Black Streaks Appear on Copies When this happens follow the procedure below to clean the fiber lens. Align the platen with the mark by sliding it to the left. 3 This most often happens when the cartridge toner is low or not evenly distributed in the cartridge. To help Cleaning the fiber lens (top distribute the toner in the cartridge, side) remove it from the copier and rock Fiber lens (top side) Copy Image Problems it several times to the left and right at a 90˚ angle. If the white streaking continues then replace the cartridge with a new one. (See "Replacing Cartridges", Turn the power switch OFF and unplug the copier. Clean the top side of the fiber lens. To clean, run a cotton swab (not included) over the entire length of the lens several on p. 21.) times. Paper feeding direction 50 03/ PC150-USA 50 5/11/04, 4:56 PM