Canon PC921 Service Manual - Page 72
cable hook [12], secure its end with adhe
View all Canon PC921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
CHAPTER 3 EXPOSURE SYSTEM 4) Lead the shorter end [6] under the No. 1 mirror mount [8] and the No. 2/3 mirror mount [9]; then, hook it on the left rear pulley [10] and the pulley [11] of the No. [10] 2/3 mirror mount. [11] [9] [8] 5) After fitting the shorter end [6] on the cable hook [12], secure its end with adhesive tape [13]. Be sure that the secured end of the cable is found where the hole in the left side plate and the tip of the cable matches. [6] Figure 3-316 [13] [12] [6] 6) Lead the longer end [14] along the cable drive pulley, and hook it on the pulley [15] on the right front side. Figure 3-317 [14] [15] 3-22 COPYRIGHT © 1999 CANON INC. Figure 3-318 CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3
EXPOSURE SYSTEM
COPYRIGHT
©
1999
CANON INC.
CANON
PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-22
Figure 3-317
Figure 3-316
[10]
[11]
[6]
[8]
[9]
Figure 3-318
[6]
[12]
[13]
[14]
[15]
4)
Lead the shorter end [6] under the No. 1
mirror mount [8] and the No. 2/3 mirror
mount [9]; then, hook it on the left rear
pulley [10] and the pulley [11] of the No.
2/3 mirror mount.
5)
After fitting the shorter end [6] on the
cable hook [12], secure its end with adhe-
sive tape [13].
Be sure that the secured end of the cable is
found where the hole in the left side plate
and the tip of the cable matches.
6)
Lead the longer end [14] along the cable
drive pulley, and hook it on the pulley
[15] on the right front side.