Canon PC980 Service Manual - Page 194
lect the multifeeder as the source
UPC - 030275182323
View all Canon PC980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS 5) Remove the two screws [5] from the [5] screw plate found at the bottom of the ma- chine. 6) While freeing the five claws [6], detach the front lower cover [7]. Figure 7-311 [6] Caution: When mounting the multifeeder unit, be sure to perform the following first: 1) Turn on the power switch; then, se- lect the multifeeder as the source of paper, and press the Copy Start key. 2) When the pickup gear unit assembly has moved to its upper limit, turn off the power switch. 3) Mount the multifeeder, and make one copy using it as the source of paper. 7-14 COPYRIGHT © 1999 CANON INC. [7] [6] Figure 7-312 Pickup gear unit Figure 7-313 CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7
EXTERNALS/AUXILIARY MECHANISMS
COPYRIGHT
©
1999
CANON INC.
CANON
PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-14
Figure 7-312
Figure 7-313
[6]
[6]
[7]
Pickup
gear unit
Figure 7-311
[5]
5)
Remove the two screws [5] from the
screw plate found at the bottom of the ma-
chine.
6)
While freeing the five claws [6], detach
the front lower cover [7].
Caution:
When mounting the multifeeder unit, be
sure to perform the following first:
1) Turn on the power switch; then, se-
lect the multifeeder as the source of
paper, and press the Copy Start key.
2) When the pickup gear unit assembly
has moved to its upper limit, turn off
the power switch.
3)
Mount the multifeeder, and make one
copy using it as the source of paper.