Canon PC980 Service Manual - Page 67
Routing the Scanner Drive Cable, Before Starting the Work
UPC - 030275182323
View all Canon PC980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. Routing the Scanner Drive Cable a. Before Starting the Work Prepare the following: • Mirror positioning tool • Cable clip • Adhesive tape 1) Set the mirror positioning tool as shown. CHAPTER 3 EXPOSURE SYSTEM 2) Prepare about five strips of adhesive tape (each one about 20 × 50 mm). 3) Remove the copyboard glass. (See Chapter 7.III.C.1."Removing the Copyboard Glass.") 4) Disconnect the connectors (J101, J131) [1] from the DC controller PCB. Figure 3-307 [1] Figure 3-308 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 3-17
CHAPTER 3
EXPOSURE SYSTEM
COPYRIGHT
©
1999
CANON INC.
CANON
PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-17
Figure 3-307
Figure 3-308
[1]
3.
Routing the Scanner Drive Cable
a.
Before Starting the Work
Prepare the following:
• Mirror positioning tool
• Cable clip
• Adhesive tape
1)
Set the mirror positioning tool as shown.
2)
Prepare about five strips of adhesive tape
(each one about 20
×
50 mm).
3)
Remove the copyboard glass.
(See Chapter 7.III.C.1.“Removing the
Copyboard Glass.”)
4)
Disconnect the connectors (J101, J131)
[1] from the DC controller PCB.