Canon PIXMA MG5620 User Manual - Page 243
Printing/Scanning with the Access Point Mode, How to terminate the Access Point Mode
View all Canon PIXMA MG5620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
Note • Pressing the right Function button displays the security setting. The password required when connecting from the external device is also displayed. • You can specify the access point name (SSID) and the security setting optionally. Setting of the Access Point Mode 7. Press the left Function button. The access point mode is enabled and the machine can be used as an access point. Printing/Scanning with the Access Point Mode Print/Scan with the access point mode following the procedure below. 1. Connect an external device such as a computer or a smartphone to the machine via wireless LAN. Perform wireless LAN settings with your external device, then assign the access point name specified for the machine as a destination. Note • For details on how to perform wireless LAN settings with an external device, refer to the device's instruction manual. • When a WPA2-PSK (AES) password is valid on the machine, entering the password is required to connect an external device to the machine via wireless LAN. Enter the password specified for the machine. 2. Start printing or scanning from an external device such as a computer or a smartphone. Note • For details on how to print or scan from an external device such as a computer or a smartphone via wireless LAN, refer to the device's or application's instruction manual. How to terminate the Access Point Mode In environments that the machine is connected with the computer over the wireless LAN usually, set the machine to the wireless LAN connection following the procedure below when you finish using the machine with the access point mode temporarily. 1. Select Setup on the HOME screen. LCD and Operation Panel 2. Select Device settings, then press the OK button. 243