Canon PIXMA MG5620 User Manual - Page 820

Error Message Appears on a PictBridge (Wireless LAN) Compliant Device The following are the possible errors that may occur when printing directly from a PictBridge (Wireless LAN) compliant device and the countermeasures to clear them. Note • This section describes errors that are indicated on Canon-brand PictBridge (Wireless LAN) compliant devices. The error messages and operations may vary depending on the device you are using. For errors on non-Canon PictBridge (Wireless LAN) compliant devices, check the Support Code (error number) on the LCD and take the appropriate action to clear the error. Support Code List • For the errors indicated on the PictBridge (Wireless LAN) compliant device and their solution, also refer to the instruction manual of the device. For other troubles on the device, contact the manufacturer. Error Message on the PictBridge (Wireless LAN) Compliant Device Action "Printer in use" If the machine is printing from the computer or warming up, wait until the job ends. When it is ready, the machine starts printing automatically. If the machine is not printing from the computer or warming up, check the Support Code on the LCD and take the appropriate action to resolve the error. Support Code List "No paper" Load paper, and select Continue* in the display on your PictBridge (Wireless LAN) compliant device. * To resume printing, you can also press the OK button on the machine instead of selecting Continue on the device. "Paper Error" If the paper output tray is closed, open it. The machine resumes printing. If the paper output tray is not closed, check the Support Code on the LCD and take the appropriate action to resolve the error. Support Code List "Paper jam" Select Stop in the display on your PictBridge (Wireless LAN) compliant device to stop printing. Remove the jammed paper, load new paper, press the OK button on the machine, and try printing again. "Printer cover open" Close the operation panel on the machine. "Waste tank full"/"Ink absorber full" The ink absorber is nearly full. 820