Canon PIXMA MX522 Getting Started - Page 2
Lower the Ink Cartridge Lock Lever.
View all Canon PIXMA MX522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
8 1 2 8 When this screen is displayed, 4 press the OK button. 8 Cuando aparezca esta pantalla, pulse el botón OK. 1 2 1 2 1 Open the Paper Output Tray and the Paper Output Cover. Insert it straight until it stops. Insértelo recto hasta que se detenga. 1 Abra la bandeja de salida del papel y la tapa de salida del papel. 5 Check that the Head Cover has opened automatically. If the Head Cover is closed, close the Paper Output Cover and open it again to open the Head Cover. Compruebe que la cubierta del cabezal se ha abierto automáticamente. Si la cubierta del cabezal está cerrada, cierre la tapa de salida del papel y vuelva a abrirla para abrir la cubierta del cabezal. 2 6 4 Insert the FINE Cartridge until it stops. Do not knock it against the sides! 4 Inserte el cartucho FINE (FINE Cartridge) hasta que se detenga. ¡No lo golpee contra los lados! 5 Lift the Ink Cartridge Lock Lever. 5 Levante la palanca de bloqueo del cartucho de tinta. 6 Repeat to to install the other FINE Cartridge. 6 Repita de a para instalar el otro cartucho FINE (FINE Cartridge). 2 Lower the Ink Cartridge Lock Lever. The left is where the Color FINE Cartridge is to be installed and the right is where the Black FINE Cartridge is to be installed. 2 Baje la palanca de bloqueo del cartucho de tinta. A la izquierda debe instalarse el cartucho FINE (FINE Cartridge) de color y a la derecha debe instalarse el cartucho FINE (FINE Cartridge) negro. 7 3 3 Unpack the FINE Cartridge, then remove the protective tape. Be careful of ink on the protective tape. 3 Desembale el cartucho FINE (FINE Cartridge) y retire la cinta protectora. Tenga cuidado con la tinta de la cinta protectora. Do not touch! ¡No tocar! If an error message appears, check that the FINE Cartridges are installed correctly. 7 Close the Paper Output Cover. Wait for about 1 to 2 minutes until this screen disappears, then proceed. 7 Cierre la tapa de salida del papel. Espere aproximadamente de 1 a 2 minutos hasta que desaparezca la pantalla y continúe. Si aparece un mensaje de error, compruebe que los cartuchos FINE (FINE Cartridges) están instalados correctamente.