Canon PIXMA PRO-200 PRO-200 series User Manual - Page 84

Diagonal lines are displayed for disabled LAN icons. 4. Use the buttons, check the IPv4 address. 3. Open web browser on your smartphone, tablet, or computer and enter IP address. Enter as following in the URL field of the web browser. http://XXX.XXX.XXX.XXX Enter the IP address in "XXX.XXX.XXX.XXX". When you access, "Remote UI" will be displayed on the web browser on your smartphone, tablet, or computer. 4. If you display Remote UI for the first time on your smartphone, tablet, or computer, select For secure communication. Download the root certificate, and then register it. Registering Printer's Root Certificate to Web Browser for SSL Communication (Remote UI) Note • Once you register the root certificate to the web browser on your smartphone, tablet, or computer, this step is not necessary after the next time. If all settings are set back to the default from the printer's operation panel, download the root certificate again, and then register it. • If the root certificate is not registered, a message to warn you that the secure connection is not guaranteed may appear. 5. Select Log in. The password authentication screen appears. Note • When the standard user mode is enabled, choose either administrator mode or standard user mode to log in. After choosing a mode and selecting Log in, the password authentication screen of each mode appears. 6. Enter password. When the password authentication is complete, the menus that can be utilized are displayed on the web browser. Important • The password is set at the time of purchase. The password is the printer serial number. The printer serial number is printed on the sticker attached on the printer. It consists of 9 alphanumeric characters (four alphabets followed by five numbers). 84