Canon PIXMA SELPHY CP1200 User Manual - Page 37

If Printing via AirPrint is Not Possible If you cannot print, check the following. • Confirm that SELPHY is on. If SELPHY is on, try restarting it to see if the problem is resolved. • Confirm that SELPHY is connected via Wi-Fi to the same access point as the Apple device. • Confirm that the paper and ink cassettes are loaded correctly. • Remove any inserted memory cards, USB flash drives, or USB cables. • Confirm that no error messages are displayed on SELPHY. • Try resetting the Wi-Fi settings (=49) and connecting again. If the issue persists, try another method of printing (=34, 37, 39) to make sure SELPHY can print correctly. If printing is still not possible, see "Troubleshooting" (=55). • It may take a few minutes after you turn on SELPHY before Wi-Fi communication is possible. Confirm that SELPHY is connected to the access point (=45) before you attempt to print. Printing from a Camera You can print as follows by connecting the printer to a camera compatible with DPS over IP, the PictBridge standard for Wi-Fi connections. 1 Prepare SELPHY. zzRemove any inserted memory cards or USB flash drives. zzInsert a loaded paper cassette and an ink cassette in SELPHY. Refer to "Initial Preparations" (=8) for details. 2 Access the setting screen. zzPress the button. zzPress the buttons to select [Wi-Fi Settings], and then press the button. zzPress the buttons to select [Connection Settings], and then press the button. Cover Contents Part Names Basic Operations Print Settings Printing via Wi-Fi Printing via USB Cable Troubleshooting Appendix 37