Canon PIXMA iP4700 iP4700 series Getting Started - Page 9
Install the Ink Tanks - print head
View all Canon PIXMA iP4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4 Install the Ink Tanks 1 1 2 345 6 2 A 1 C B 2 Pull the orange tape (1) in the direction of the arrow to peel off the protective film and remove the film (2) completely. While pressing down with your left thumb, twist off the orange protective cap (A) located on the bottom of the ink tank. • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. • If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. In this case, close and reopen the Top Cover. • Be sure to use the supplied ink tanks. • Do not touch the electrical contacts (B) or open ink port (C) on the ink tank. The printer may not print properly if you touch them. • Do not hold the sides of the ink tank; ink may splash.