Canon PIXMA iP6700D Direct Printing Guide - Page 68

Paper Does Not Feed Properly/Printed Surface is Scratched on

Get Canon PIXMA iP6700D PDF manuals and user guides View all Canon PIXMA iP6700D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Possible Cause Paper jams inside the Transport Unit Try This Remove the paper according to the following procedure. (1) Open the rear cover. (2) When you can see the jammed paper, slowly pull the paper out. If you cannot pull the paper out, turn the printer off, and then turn it back on. The paper will be ejected automatically. Be careful not to touch the components inside the printer. (3) Close the rear cover. (4) If you could not pull the paper out in step (2), remove the cassette. (5) Slowly pull the jammed paper out. (6) If any paper is sticking out of the cassette, reload the paper in the cassette. (7) Insert the cassette into the printer again, and press the OK button on the printer. If you have turned off the printer in step (2), you will need to retry printing, because this operation cancels any print jobs in progress. When reloading the paper into the printer, see "Back of Paper is Smudged/ Paper Does Not Feed Properly/Printed Surface is Scratched" on page 62 to confirm that you are using the correct paper and are loading it into the printer correctly. If you cannot remove the paper or if the paper tears inside the printer, or if the paper jam error continues after removing the paper, contact the Customer Care Center. 66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
66
Paper jams inside the Transport Unit
Remove the paper according to the following procedure.
(1)
Open the rear cover.
(2)
When you can see the jammed paper, slowly pull the paper out.
If you cannot pull the paper out, turn the printer off, and then turn it back on.
The paper will be ejected automatically.
Be careful not to touch the components inside the printer.
(3)
Close the rear cover.
(4)
If you could not pull the paper out in step (2), remove the cassette.
(5)
Slowly pull the jammed paper out.
(6)
If any paper is sticking out of the cassette, reload the paper in the cassette.
(7)
Insert the cassette into the printer again, and press the OK
OK
OK
OK button on the
printer.
If you have turned off the printer in step (2), you will need to retry printing,
because this operation cancels any print jobs in progress.
When reloading the paper into the printer, see “Back of Paper is Smudged/
Paper Does Not Feed Properly/Printed Surface is Scratched” on page 62 to
confirm that you are using the correct paper and are loading it into the printer
correctly.
If you cannot remove the paper or if the paper tears inside the printer, or if the
paper jam error continues after removing the paper, contact the Customer Care
Center.
Possible Cause
Try This