Canon PIXMA mini260 Easy Setup Instructions - Page 2

Windows® Printer Drivers Installation Windows Note • A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to connect your printer to a computer. • The screens below refer to Windows XP Service Pack 2 installation. Screens may differ depending on the operating system you are using. • Log on as a member of the Administrators group before continuing. • Before installing the printer driver, disable all anti-virus programs and automatically loading programs. a Turn OFF the printer. (1) Press the ON/OFF button. (2) Be sure the LCD and all the lamps on the Operation Panel are off. b Turn the computer on and start Windows. Important If you see the Found New Hardware Wizard, turn off the printer. Remove the USB cable connected to your computer. Next, click Cancel. Then proceed from step 3 to install the printer driver. f Read the License Agreement and click Yes. Follow the on-screen instructions to install the software. If a message asking for your confirmation to restart your computer appears, click OK. g When the Printer Connection screen appears, ensure that the printer is connected to the computer with the USB cable, then turn the printer on. The software will begin identifying the printer port being used. Important If you cannot proceed to the next procedure after three minuets, refer to "Troubleshooting" instructions in the Photo Printing Guide. Macintosh® Printer Drivers Installation Macintosh Note • A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to connect your printer to a computer. • Use Mac® OS X v.10.2.8 to 10.4.x. • The screens below refer to Mac OS X v.10.4.x installation. Screens may differ depending on the operating system you are using. • Log on as a Administrator before continuing. • Before installing the printer driver, disable all anti-virus programs and automatically loading programs. • Since Mac OS X Classic environments is not supported, do not connect the printer. a Connect the end of the USB cable to the computer, the other to the printer. Note Make sure the printer is turned on. g When the list of applications to install appears, verify the contents, click Install, then follow the instructions on the screen. Note Move the cursor over items to display explanations of each application below. h Read the License Agreement, then click Yes. Follow the on-screen instructions to install the software. i Follow the on-screen instructions to register your product. Note When the Registration Screen appears, follow the on-screen instructions to register your product. You will need your product serial number, which is located on the bottom face of the printer. j When the Installation completed successfully screen appears, click Restart. c Insert the Setup CD-ROM. The setup program should run automatically. Note The setup program should run automatically. If the installer in the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon. d When the main menu appears, click Easy Install and follow the on-screen instructions. h Follow the on-screen instructions to register your product. Note When the Registration Screen appcars, follow the on-screen instructions to register your product. You will need your product serial number, which is located on the bottom face of the printer. i When the Installation completed successfully window appears, click Exit. Note • Select Easy Install in order to install the printer driver, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. • To install Adobe® RGB (1998), click Custom Install. e When the list of applications to install appears, verify the contents, click Install, then follow the instructions on the screen. Note Move the cursor over items to display explanations of each application below. If Restart is displayed, click Restart to restart the system. Now you have completed installation of the software. b Turn on your Mac. c Insert the Setup CD-ROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. d Double-click the Setup icon. e When the Authenticate screen appears, enter your administrator name and password. Click OK. If you do not know your administrator name or password, click , then follow the on-screen instructions. f When the main menu appears, click Easy Install and follow the on-screen instructions. Note Select Easy Install in order to install the printer drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. The system is restarted automatically. *When connecting from Mac OS X v.10.3.3 or earlier: Restarting the computer while connected to the printer may cause the not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the printer OFF then back ON again. k After restarting the computer, start Printer Setup Utility (start Print Center when you use Mac OS X v.10.2.8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, press the Add button to add the printer. For more detailed instructions, refer to the Mac on-screen Help. Now you have completed installation of the software. Part no. QT5-0755-V01 © 2006 Canon Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. All other product and brand names are trademarks of their respective owners. Specifications subject to change without notice. Printed in Vietnam.