Canon PowerShot S40 PowerShot S40/S30 Camera User Guide - Page 19
Installing the Battery Pack
![]() |
View all Canon PowerShot S40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the Battery Pack Install Battery Pack NB-2L (supplied) into the camera as follows. Use a household power source to power the camera for extended periods (p. 19). 1 Turn off the camera (p. 27, 29). • Check that the power/mode indicator is not lit. 2 Slide the CF card slot/battery cover in the direction of the arrow to open the cover. 3 Hold back the battery lock in the direction of the arrow with the corner of the battery pack, then insert the battery pack into the compartment until it is locked. • To remove the battery pack, release the battery Battery lock lock. 4 Close the CF card slot/battery cover then slide it to the original position until it clicks. • Charge the battery pack before using it the first time (p. 15). • When the upper indicator on the left side of the viewfinder is flashing green, the CF card is being written to, read, erased or transmitted to. Therefore, never turn off the camera or open the CF card slot/battery cover while this indicator is flashing green. • Remove the battery pack when the camera is not in use. Preparing the Camera 17
![](/manual_guide/products/canon-powershot-s30-powershot-s40s30-camera-user-guide-abc4668/19.png)