Canon PowerShot S40 PowerShot S40/S30 Camera User Guide - Page 95
Magnifying Images
View all Canon PowerShot S40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Magnifying Images In single image replay, the displayed image can be shown magnified by an approximate factor of 2.5 or 5 for PowerShot S30 and 3 or 6 for PowerShot S40. 1 Slide the power/replay lever to the right. 2 Slide the zoom lever toward . Magnified approximately 3 times (PowerShot S40) Approximate position Magnified approximately 6 times Approximate (PowerShot S40) position • The display cycles to the next magnification mode each time you slide the zoom lever toward . • You can move around the magnified image using B, A, C or D on the multicontroller. Reducing the size of the enlarged image until it displays in its original size 1 Slide the zoom lever toward . • The most magnified image is reduced to 2.5 times the original size for PowerShot S30 and 3 times the original size for PowerShot S40 by sliding the zoom lever toward . Sliding the zoom lever toward again reduces the image to its original size. • Movie frames and index replayed images cannot be magnified. • If the camera is protected by Digital Camera Waterproof Case WP-DC300, you cannot move the magnified area using C or D on the multicontroller. • You can magnify an image while it is displayed on the LCD monitor in Shooting mode immediately after the image is shot (p. 46). Replaying 93