Canon REALiS LCOS WUX6500 WUX6500 Users Manual - Page 67
Resetting the Image Shift, Select the Aspect, Types of Aspect Ratios, 3 D. image shift
View all Canon REALiS LCOS WUX6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Basic Guide Projection Procedure Projection Procedure 4:3 D. image shift Select this when you use a screen with an aspect ratio of 4:3. Keystone correction cannot be performed in this mode. However, it is possible to move the image left / right when projecting level. For details about how to move the image, refer to "Digital image shift" on page 107. 5 Press the OK button to accept your setting and then press the MENU button. Resetting the Image Shift Perform the following steps to reset the image shift adjustment. 1 Access the [D. image shift adjustment] window and press the D.SHIFT/ KEYSTONE button to display the [D. image shift reset] window. 2 Next, select [OK] with the [ ] button, and then press the OK button. Your specified [D.image shift adjustment] is now reset. Select the Aspect Select [Aspect] based on the input signal type, aspect ratio of the screen and resolution. For more details about aspect ratios, refer to "Relationship between Aspect and Screen Aspect" on page 183. Types of Aspect Ratios ■ Auto An image is projected at the aspect ratio of the input signal. Select this mode for normal image projection. ■ 16:10 The image is projected using an input signal aspect ratio of 16:10. Select this if an image of 16:10 aspect ratio cannot be correctly projected in [Auto] mode. There may be some cases when this cannot be selected, depending on the input signal and/or resolution. ■ 16:9 The image is projected using an input signal aspect ratio of 16:9. Select this if an image of 16:9 aspect ratio cannot be correctly projected in [Auto] mode. ■ 4:3 The image is projected using an input signal aspect ratio of 4:3. Select this if an image of 4:3 aspect ratio cannot be correctly projected in [Auto] mode. 65