Canon REALiS LCOS WUX6500 WUX6500 Users Manual - Page 95
Split screen, Input level
View all Canon REALiS LCOS WUX6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Menu Description Split screen > [Input settings] > [Split screen] Two input images from devices connected to the projector can be projected side by side. Option Off On Exit split-screen mode. Activate split-screen mode. Function Settings Submenu Function Split screen Switch between normal and split-screen projection. Select the image to control. When the left image is Control rights selected, 1 is displayed, and when the right image is selected, 2 is displayed. Swap rightleft Switch the sides that images are projected on. Mode 3-7 Use 30% of the screen width for the left side and 70% for the right. Layout Mode 5-5 Use 50% of the screen width for the left side and 50% for the right. Mode 7-3 Use 70% of the screen width for the left side and 30% for the right. • Network and USB input cannot be combined for split-screen display. Similarly, HDBaseT and HDMI input cannot be combined. • Control can be switched to the other side by pressing the [ ] / [ ] on the remote control when ( ) or ( ) is displayed in the center of the image area. • When you switch to split-screen display, the left and right signals and input status are shown in the input window. For details on split-screen mode, see "Split-Screen Display" (P161). Input level > [Input settings] > [Input level] Adjust the input level for content projected via HDMI or HDBaseT. Option Auto Normal Expanded Function Automatically switches the input level based on the input signal. Limits the input level to 16 - 235. Enables a full input level of 0 - 255. Advanced Guide Menu Description 93