Canon REALiS LCOS WUX6700 WUX7500 WUX6700 WUX5800 Users Manual - Page 93

Connection Procedure Setting Errors When a setting-related error occurs, the error name is displayed on the screen, and a " " mark is displayed next to the input field which caused the error. Installation Guide Connection Procedure The error meanings are as shown below. Input error Error Password setting error Invalid SMTP System failed to connect SMTP server. System failed to connect POP3 server. System doesn't support this auth type. System failed to authenticate. The system failed to send the test mail. Wired network is down At the time of Monday, it is already set.* Cannot make network settings because IPsec setting is ON. Cannot make IPsec settings because DHCP setting is ON. Meaning A setting outside the valid range was set on the settings screen. The set password and confirmation password did not match. The SMTP server IP address has not been set. Failed to connect to the SMTP server attempting to send a test mail. Failed to connect to the POP3 server attempting to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of test mail failed due to a connection failure with the SMTP server or an error which does not ordinarily occur. Wired networking is disabled. Failed to set the schedule, because operation is already scheduled for the specified time and day. It is not possible to make network settings because IPsec is set to [ON]. It is not possible to make IPsec settings because DHCP is set to [ON]. * Messages vary depending on the day. 91