Canon S230 PowerShot S230, Digital IXUS V3 Camera User Guide - Page 51
Shooting in, Red-Eye Reduction
UPC - 013803020779
View all Canon S230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
48 Shooting • When you use flash photography at higher ISO speeds, the chances of white streaks appearing in the image increase the closer you approach to the subject. • Since a slow shutter speed is selected in dark places when the flash is set to Off or Slow-Synchro, take care to avoid blurring the image. - Shooting in Mode Be careful to hold the camera still to avoid camera shake. - Shooting in , or Mode Fix the camera to a tripod to shoot in these modes since the shutter speed will be slower than in the mode. If an image is dark in mode, reshooting it in mode will make it brighter. • When shooting with the flash, light may reflect off dust particles or insects in the air and appear as white spots or white asterisks on the image. This occurs more frequently with wide-angle shots. This phenomenon is common to digital cameras and does not indicate a malfunction. • The flash can be fired when the upper indicator lights a steady orange. • The flash may take up to approximately 10 seconds to charge. The recharging time will vary with such factors as the shooting conditions and battery charge. • The flash fires twice. The main flash follows a preparatory preflash. The exposure reading obtained from the subject with the pre-flash is used to set the optimal flash intensity for the main flash, which is used to capture the image. Red-Eye Reduction • Light reflecting back from eyes can make them appear red when the flash is used in dark areas. Under these conditions, use the redeye reduction mode. For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. Even better results can be obtained by shooting with the lens set to a wide angle, increasing the lighting in indoor settings or approaching closer to the subject. • The shutter will not activate for approximately 1 second after the red-eye reduction lamp fires in order to improve the effect. If you want a more immediate shutter response, set the flash to , or .