Canon S300 S300 Quick Start Guide - Page 8
Use the same procedure to install
UPC - 013803006315
View all Canon S300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
protective cap 2 Hold the ink tank as shown in the diagram and remove the protective cap. ¯Notes • Do not shake or drop ink tanks as this may cause the ink to leak out and stain your clothes and hands. • Do not touch the ink port. • Do not attempt to reattach the protective cap once it has been removed. ink port 3 Insert the black ink tank into the right- hand slot. 4 Press the top until it clicks into place. 5 Use the same procedure to install the colour ink tank in the left hand slot. 6 Close the front cover. Wait until the POWER lamp remains fully lit (about 60 seconds). ¯Note You will be notified when ink is low during printing if you enable a low ink warning. For more details about the low ink warning, refer to the User's Guide. 6
2
Hold the ink tank as shown in the
diagram and remove the protective
cap.
Notes
• Do not shake or drop ink
tanks as this may cause
the ink to leak out and
stain your clothes and
hands.
• Do not touch the ink port.
• Do not attempt to reattach
the protective cap once it
has been removed.
3
Insert the black ink tank into the right-
hand slot.
4
Press the top until it clicks into place.
5
Use the same procedure to install the
colour ink tank in the left hand slot.
6
Close the front cover.
Wait until the POWER lamp remains fully lit
(about 60 seconds).
Note
You will be notified when ink is low during
printing if you enable a low ink warning.
For more details about the low ink warning,
refer to the User’s Guide.
6
ink port
protective cap