Canon SD1000 PowerShot SD1000 / DIGITAL IXUS 70 Camera User Guide Advanced - Page 118
Subject in recorded image is too dark., or image flashes white., Image contains noise., Basic, Guide
UPC - 013803078015
View all Canon SD1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Subject in recorded image is too dark. Insufficient light for zSet the flash to (flash on) (Basic shooting. Guide p. 14). The subject is zSet the exposure compensation to a underexposed because positive (+) setting (p. 52). the surroundings are too zUse AE lock or use the spot metering bright. function (pp. 49, 51). Subject is too far away for flash to reach. zShoot within correct flash range of the subject when using the built-in flash (p. 135). zRaise the ISO speed and then shoot (p. 65). Subject in recorded image is too bright, or image flashes white. Subject is too close, zShoot within correct flash range of making the flash too the subject when using the built-in strong. flash (p. 135). The subject is zSet the exposure compensation to a overexposed because negative (-) setting (p. 52). the surroundings are too zUse AE lock or use the spot metering dark. function (pp. 49, 51). Too much light is shining zChange the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on. zSet the flash to Guide p. 14). (flash off) (Basic Image contains noise. ISO speed is too high. zHigher ISO speeds and the (High ISO Auto) setting may increase image noise. For higher image quality, select as low an ISO speed as possible (p. 65). zIn , , , , , and modes, the ISO speed increases and noise can appear. 116