Canon Speedlite Transmitter ST-E3-RT Instruction Manual - Page 23
Setting the Master Unit Transmission Channel / Wireless, Radio ID, Display <, >., Set a channel
View all Canon Speedlite Transmitter ST-E3-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Wireless Settings Setting the Master Unit Transmission Channel / Wireless Radio ID Use the following procedure to set the master unit's transmission channel and wireless radio ID. Set the same channel and ID for both the master unit and slave unit. For the slave unit settings, see the flash's instruction manual. 1 Display . Press function button 4 to display . 2 Set a channel. Press function button 1 . Turn to select "AUTO" or a channel from Ch. 1 to 15, and press the button. 3 Set a wireless radio ID. Press function button 2 . Turn to select the position (digit) to set, and press the button. Turn to select a number from 0 to 9, and press the button. Repeat step 3 to set a 4-digit number. Press function button 4 to return to the shooting-ready state. X When transmission between the master unit and slave unit is established, the lamp is lit in green. 21