Canon Speedlite Transmitter ST-E3-RT Instruction Manual - Page 36
Wireless Multiple Flash Shooting with Manual Flash Output
View all Canon Speedlite Transmitter ST-E3-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
q: Wireless Multiple Flash Shooting with Manual Flash Output This describes wireless (multiple flash) shooting using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Set all parameters on the master unit. 1 Set the flash mode to . 2 Set the number of firing groups. While is displayed, press function button 2 and set the groups to fire. The setting changes as follows each time you press the button: ALL (_) → A/B (%) → A/B/C (]). 3 Select a firing group. Press function button 3 , turn and select the group for which you want to set the flash output. 4 Set the flash output. Press function button 3 . Turn to set the flash output, and press the button. Repeat steps 3 and 4 to set the flash output of all groups. 5 Take the picture. X Each group fires at the set flash output. When ALL is set, set A, B or C as the firing group for the slave units. The flash will not fire if it is set to D or E. To fire multiple slave units with the same flash output, select ALL in step 2. 34