Canon Sure Shot 85 PowerShot A85 Camera User Guide - Page 126

Problem, Cause, Solution

Page 126 highlights

Troubleshooting Problem Cause Solution The batteries are Battery capacity drops due to low z If shooting in a cold area, keep the batteries consumed quickly. ambient temperatures. warm (by placing them in an inner pocket, etc.) until ready to use them. Battery terminals are dirty. z Wipe them well with a dry cloth before use. The batteries have not been used z Performance should return to normal after for over a year. several charging cycles. Battery life exceeded. z Replace all 4 batteries with new ones. If using Batteries were placed in the rechargeable charger in the wrong direction. batteries: Batteries Poor electrical contact, between do not charge in batteries and the charger. separately sold battery charger. z Put batteries back into the charger in the correct direction. z Be sure to set batteries firmly into the charger. z Be sure that the power cord is firmly connected to the charger, and is firmly plugged in to the power outlet. Battery terminals are dirty. z Wipe them well with a dry cloth before charging. z Reload the batteries several times. Battery life exceeded. z Replace all 4 batteries with new ones. Shots are blurry or The camera was moving when you z Hold the camera steady when shooting. unfocused. took the shot. Autofocus function hampered by z Be careful not to block the AF-assist beam obstruction to AF-assist beam. flash part with a finger or other object. The AF-assist beam settings are z Turn the [AF-assist beam] setting [On] (p. 67). set to [Off]. 124

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

124
Troubleshooting
The batteries are
consumed quickly.
Battery capacity drops due to low
ambient temperatures.
If shooting in a cold area, keep the batteries
warm (by placing them in an inner pocket, etc.)
until ready to use them.
Battery terminals are dirty.
Wipe them well with a dry cloth before use.
The batteries have not been used
for over a year.
Performance should return to normal after
several charging cycles.
Battery life exceeded.
Replace all 4 batteries with new ones.
If using
rechargeable
batteries: Batteries
do not charge in
separately sold
battery charger.
Batteries were placed in the
charger in the wrong direction.
Put batteries back into the charger in the
correct direction.
Poor electrical contact, between
batteries and the charger.
Be sure to set batteries firmly into the charger.
Be sure that the power cord is firmly
connected to the charger, and is firmly plugged
in to the power outlet.
Battery terminals are dirty.
Wipe them well with a dry cloth before charging.
Reload the batteries several times.
Battery life exceeded.
Replace all 4 batteries with new ones.
Shots are blurry or
unfocused.
The camera was moving when you
took the shot.
Hold the camera steady when shooting.
Autofocus function hampered by
obstruction to AF-assist beam.
Be careful not to block the AF-assist beam
flash part with a finger or other object.
The AF-assist beam settings are
set to [Off].
Turn the [AF-assist beam] setting [On] (p. 67).
Problem
Cause
Solution