Canon VB-H45 Network Camera Operation Guide - Page 118
Camera Settings, Digital PTZ Position], Simple Camera Settings], Motion Priority, Depth Priority
View all Canon VB-H45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
S30 S31 If you select [Do Not Register], the camera angle will move to the home position the next time it is booted. If you have not specified the home position, the camera angle will move to the factory default setting. For information on specifying the home position, please refer to P. 118. Note HM4x S30 S31 When [Digital PTZ Position] is set to [Do Not Register], you can perform pan, tilt, and zoom operations on the video display area using Area Zoom (P. 58). [Digital PTZ Position] Register the current digital PTZ position as the initial setting. If you select [Register], a yellow frame is shown in the video display area. Operate the frame to specify the Digital PTZ trim position during startup. Note The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the Digital PTZ of the Viewer (P. 65). Camera Settings Sets the camera settings at camera start up. [Simple Camera Settings] Recommended settings for [Camera Settings] are displayed according to the selected type (The table below shows the items and their differing recommended values). You can also change the recommended settings as required and click [Apply]. Type Motion Priority Usage scenario Reduces vibrations for moving subjects. [Exposure] Auto [AGC Limit] 6 [Shutter Speed Limit (Lower)] HM4x H730 1/1000 (sec.) S30 S31 S80x S90x 1/250 (sec.) [Shutter Speed Limit (Upper)] 1/16000 (sec.) [Smart Shade Control] Disable [Noise Reduction] Mild [Sharpness] 3 [Color Saturation] 4 [Haze Compensation] Disable Depth Priority HM4x H730 Focuses within a wide range, from near to far. Auto (Aperturepriority AE) 6 1/30 (sec.) 1/16000 (sec.) Disable Standard 6 4 Disable Low Light Visibility Data Size Reduction Brightens by raising the sensitivity for dark subjects. Reduces the data size in low-light conditions. Standard Settings Cancels the scenario settings and restores the factory default settings. Auto Auto Auto 6 4 6 1/8 (sec.) 1/8 (sec.) 1/30 (sec.) 1/16000 (sec.) Disable Strong 3 4 Disable 1/16000 (sec.) Disable Strong 3 2 Disable 1/16000 (sec.) Disable Standard 3 4 Disable 100