Canon VB-H45 Network Camera Operation Guide - Page 166
[Video Record] > [E-mail Notification] Setting E-mail Notification, E-mail Notification
View all Canon VB-H45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
[Video Record] > [E-mail Notification] Setting E-mail Notification Settings for sending an e-mail notification to a specified recipient when an event is triggered. The following settings can be configured here. • E-mail Notification E-mail Notification Set the mail server to be used for e-mail notifications and the content of the e-mail to be sent. [Notification] [Subject] and [Message Body] are text. If you set [Text with Video], an image (JPEG format) captured immediately before the event will be attached. [Copy E-mail Settings] Copy the e-mail settings used in [Maintenance] > [Log] > [Log Notifications] (P. 203). However, the password is not copied. [Mail Server Name] Enter the host name or IP address of the SMTP server. [Mail Server Port] Enter the port number for the SMTP server. [Sender (From)] Enter the e-mail address of the sender. [Recipient (To)] Enter the e-mail address of the recipient. [Authentication] Select an authentication method suited to the destination SMTP server. [User Name], [Password], [POP Server] Enter the user name and password needed for authentication, and the POP server host name or IP address when e-mail authentication is set to [POP before SMTP]. [User Name], [Password] Enter the user name and password needed for authentication when e-mail authentication is set to [SMTP-AUTH]. [Subject] Enter the subject of the e-mail in alphanumeric characters. [Message Body] Enter the message body (text) of the e-mail in alphanumeric characters. Parameters can be specified in the text using the "%" character (P. 206). [E-mail Notification Test] Clicking [Exec] initiates an e-mail notification test based on the settings currently entered. It is not necessary to click [Apply]. After entering a password, first click [Exec], then click [Apply]. 148