Canon VB-H630D Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M62 - Page 120
Setting Event Operations [Event] tab, Setting Detection Areas
View all Canon VB-H630D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Setting Event Operations ([Event] tab) Set operations to be performed upon detection of changes in a subject. [Event] tab (1) (2) (3) (4) (5) (1) Specify the operation timing. (Multiple checkboxes can be selected.) [ON Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the moment detected mode is triggered to ON. [OFF Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the moment detected mode is triggered to OFF. [Detected mode Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed for as long as detected mode is active. (2) Specify the event operation. (Multiple checkboxes can be selected.) [E-mail Notification] checkbox When selected, e-mail notification is performed at the timing set in (1). [E-mail Notification] must be set in advance under [Upload] in the Setting page (p. 68). [Video Record] checkbox When selected, video record is performed at the timing set in (1). [Video Record Action] must be set in advance under [Event] in the Setting page (p. 71). (3) Specify the audio playback timing. [Audio Playback at ON Event] checkbox When selected, the sound set in (4) [Sound Clip Name] is played at the moment the detected mode is triggered to ON. [Audio Playback at OFF Event] checkbox When selected, the sound set in (4) [Sound Clip Name] is played at the moment the detected mode is turned OFF. (4) Set the playback sound. [Sound Clip Name] Select the sound that is to be played. The sound clip name set for [Sound Clip Upload] under [Event] in the Setting page is shown in the pull-down list (p. 74). [Volume] Set the audio playback volume in the range of 1 to 100. (5) Operation of External Device Output [External Device Output for ON Event] checkbox Select this checkbox for enabling external device output at an ON event and select output destination (output 1 or 2) and operation (active or inactive). [External Device Output for OFF Event] checkbox Select this checkbox for enabling external device output at an OFF event and select output destination (output 1 or 2) and operation (active or inactive). Setting Detection Areas Set detection areas in the video display area. Setting a [Rectangular] detection area By default, a rectangle is shown in the video display area. Move or resize that rectangle to set a detection area. Setting a [Polygonal] detection area Specify polygonal areas with a maximum of 32 angles. Click in the video display area to form the polygon point by point. Click on a previously set point to complete the polygon and set the enclosed area as the detection area. The set area can also be moved by dragging it. 120