Canon VB-H652LVE User Manual - Page 129
Configuring View Restrictions
View all Canon VB-H652LVE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Configuring View Restrictions Set a restrict view area and click [Apply] to restrict the capture range of the Camera Viewer. Important • If you have changed how the camera is installed, reconfigure the view restriction settings. • Check view restrictions again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page. • When [Camera] > [Camera] > [Camera Control] > [Digital Zoom] or [Image Stabilizer] is changed on the Setting Page, check the view restriction settings again. 1 Select [Enable] in [View Restrictions]. Note To delete view restriction settings, select [Disable], and click [Apply]. 2 Use the video display area to configure the view restrictions. Operate the camera angle using the frame on the video display area or the panorama screen to get the positioning value, and specify the restrict view area. You can perform the following operations in the video display area. R13 R12 M50 - Centering the camera angle to the position you click - Area zoom operations (P. 69) Setting Page 5 [Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit] R13 R12 M50 Operate the camera angle to the upper limit, lower limit, left limit, and right limit to set in the video display area. Click [Get value] in each position to reflect the values to the pan/tilt preview frame. Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit] to move the preview frame to the upper limit, lower limit, left limit, and right limit of the current pan/tilt preview frame, respectively, and display it in the video display area. Note R13 R12 In the following cases, (warning icon) will be displayed with a message stating that the restrict view area cannot be configured, and you will become unable to set view restrictions. • For [Left Limit]/[Right Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 110) is set to [Enable] • For [Upper Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 110) is set to [Enable], and [Camera] > [Installation Conditions] > [Image Flip] (P. 112) is also set to [Enable] • For [Lower Limit]: If [Camera] > [Camera Control] > [Auto Flip] (P. 110) is set to [Enable], and [Camera] > [Installation Conditions] > [Image Flip] (P. 112) is set to [Disable] To set the upper limit, lower limit, left limit, and right limit, set [Camera] > [Camera] > [Camera Control] > [Auto Flip] (P. 110) to [Disable]. [Telephoto]/[Wide-angle] Operate the camera angle to the wide-angle/telephoto limit to set, using the frame on the video display area or the panorama screen. Click [Get value] in each position to reflect the values to the wide-angle preview frame/telephoto preview frame. 129