Canon VB-H760VE User Manual - Page 139
Tour Route Settings
View all Canon VB-H760VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
(b) (c) (b) Preview Frame (Blue Frame) Indicates the current camera angle in the video display area 5 (c) Preset Preview Frame (White Frame) Indicates the preset/home position that is currently selected. Setting Page Tour Route Settings The number of tour routes you can register and the number of presets that can be toured per route are as follows. • Maximum 5 routes, maximum 64 presets per route R13 R12 M50 • Maximum 5 routes, maximum 20 presets per route H761 H760 • Maximum 1 route, maximum 20 presets per route H652 H651 H751 Note R13 R12 M50 H761 H760 If the effective conditions or active times of the registered tour routes conflict, the routes listed higher in the [Route List] take precedence. 1 Select the tour route to configure from [Route List]. R13 R12 M50 H761 H760 2 Specify the settings for tour route name and usage. [Effective Conditions] Select the conditions to preform a preset tour. [Not used] Preset tour is not performed. [Viewers Connected] Preset tour is performed when a Viewer is connected to the camera. [Always] Preset tour is always performed. Note When [Not used] is selected, the following preset tour route settings cannot be configured. [Route Name] R13 R12 M50 H761 H760 Enter the tour route name. [Specify Active Time] Select [Specified] to configure a preset tour at a predetermined time, and enter the start time and end time for the preset tour. If [Viewers Connected] is set for [Effective Conditions], the preset tour operates when the Viewer is connected to the camera at the tour start time. If [Always] is set for [Effective Conditions], the preset tour always operates. [Reverse Route] R13 R12 M50 H761 H760 If you select [Enable], the preset tour order in [Edit Tour Route] will be reversed. 139