Canon VB-S31D User Manual - Page 47
H.2642, On-screen display, Select [YYYY/MM/DD], [DD/MM/YYYY] or [MM/DD
View all Canon VB-S31D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
[Video] Setting Video Size, Quality and Frame Rate (3) [Target Bit Rate (kbps)] If [Use bit rate control] is selected in (2), select a Important desired target bit rate from the 17 levels from [64] to • When [H.264(1)] is selected for the memory card recording [16384]. and upload settings, the following restrictions apply to the [H.264(1)] setting. (4) [Video Quality] - Only [Use bit rate control] can be selected for [Bit Rate If [Do not use bit rate control] is selected in (2), select a desired quality from 1 to 5 (total 5 levels) for H.264 Control]. - Only [3072] or less can be selected for [Target Bit Rate 4 video transmission. (kbps)]. Setting Page Greater values have higher quality. (5) [Frame Rate (fps)] Select [30], [15], [10], [6], [5], [3], [2] or [1] (fps) for the frame rate of video transmitted. - Only one of [0.5], [1], and [1.5] can be selected for [I Frame Interval (sec)]. • Network load will increase if a larger video size is set or higher video quality and target bit rate are set, as this increases data size per frame. As a result, the following could Important occur: JPEG: The frame rate may drop When streaming two H.264 videos, setting the video size settings for H.264(1) and H.264(2) to the following H.264: Video may be temporarily disrupted combinations restricts the frame rate to a maximum of 15 fps. For all other combinations, a frame rate of up to 30 fps can be selected. • Block noise may become noticeable if a large video size and low target bit rate are set. • The data size may increase depending on the type or H.264(1) H.264(2) movement of the subject. If the frame rate remains low or 1920 x 1080 All sizes other undesirable conditions continue for a prolonged period, lower the video size or quality setting. All sizes 1920 x 1080 • Note that if you are using included RM-Lite, the hard disk 1280 x 960 1280 x 960 usage will also be affected during recording. 1280 x 720 1280 X 720 • H.264 video can be displayed using Admin Viewer and RMLite. However, it cannot be displayed using VB Viewer. (6) [I Frame Interval (sec)] Select [0.5], [1], [1.5], [2], [3], [4] or [5] for the I frame interval (sec) for H.264 video. On-screen display H.264(2) (1) [H.264(2)] Select [Enable] to distribute H.264 video using two streams. Note that H.264(2) video cannot be used for upload, memory card recording, or RM-Lite. Refer to the settings for "H.264(1)" for details about [Video Size], [Bit Rate Control], [Target Bit Rate (kbps)], [Video Quality], [Frame Rate (fps)], and [I Frame Interval (sec)] settings. (1) [Date display] Select whether to enable date display over video. If [Enable] is selected, date information will be displayed over video. (2) [Position of date display] Select [Upper left], [Upper right], [Lower left] or [Lower right] for the position of date display information. (3) [Format of date display] Select [YYYY/MM/DD], [DD/MM/YYYY] or [MM/DD/ YYYY] for the format of the date display. (4) [Time display] Select whether to enable time display over video. If [Enable] is selected, display time information will be displayed over video. 47