Canon VB-S905F Network Camera VB-S900F/VB-S905F Installation Guide - Page 1

Canon VB-S905F Manual

Page 1 highlights

Network Camera / Installation Guide BIE-7019-001 ENGLISH Part Names Serial  Please be sure to read the "Safety Precautions" section for correct use. After reading this Installation Guide, keep it in a readily accessible location for future reference. This camera is for indoor use only. * Some cameras are not sold in some regions. WARNING To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Caution Request a professional installer for all camera installation work. Never try to install the camera yourself. Doing so may result in unforeseen accidents such as dropping the camera or electric shock. Check Included Items Camera (VB-S900F/VB-S905F) Setup CD-ROM Installation Guide (This document) Warranty Card Notice  MAC 1. Mounting Screw Hole (a 1/4-20 UNC mounting screw less than 5.5 mm (0.22 in.) in length will fit the screw hole) 2. Lens 3 4 Installing the Camera 1 B C Weight: Approx. 180 g (6.4 oz.) (camera only) a. Mounting bracket b. Mounting screw hole Example installations Using a ceiling mounting bracket Using a wall mounting bracket © CANON INC. 2015 Printed in Taiwan 8 5 6 7 3. Memory Card Slot Cover 4. 100Base-TX LAN Connector 5. External Device I/O Terminal 6. Audio Input Terminal 7. Reset Switch 8. LED 2 E D Please see the reverse side of this guide for details. If Using a Memory Card e f e. Memory Card Slot f. Reset Switch (see "Operation Guide") To remove the memory card, push it in and release it so it pops out slightly. Grasp the card and remove it. Important • Insert a memory card before installing the camera. • When using a memory card with the camera for the first time, it is recommended to format the card after inserting it into the camera (see "Operation Guide"). External Dimensions 67 (2.64) LED : When powered on, during reboot, during normal use : When [Turn Off] is selected (see "Operation Guide") c. LAN cable d. LED 3 Set the camera angle Check the video on the computer's screen and manually adjust the camera's angle. Use the camera's "Setting Page" > "Camera Angle" to set the digital zoom (see "Operation Guide"). 4 Perform camera settings by using the software found on the Setup CD-ROM (see "Operation Guide"). 54 (2.13) 13.6 (0.54) 32 (1.26) 114 (4.49) 11.4 (0.45) Unit : mm (in.) The contents of this guide are subject to change without any prior notice.

  • 1
  • 2

Installing the Camera
1
Weight: Approx. 180 g (6.4 oz.)
(camera only)
a
b
a. Mounting bracket
b. Mounting screw hole
Example installations
Using a ceiling
mounting bracket
Using a wall mounting bracket
2
d
c
LED
: When powered on, during reboot, during normal use
: When [Turn Off] is selected (see “Operation Guide”)
Please see the reverse side
of this guide for details.
c. LAN cable
d. LED
3
Set the camera angle
Check the video on the computer’s screen and manually adjust
the camera’s angle. Use the camera’s “Setting Page” > “Camera
Angle” to set the digital zoom (see “Operation Guide”).
4
Perform camera settings by using the software found on the
Setup CD-ROM (see “Operation Guide”).
Network Camera
/
Installation Guide
Part Names
1
2
Serial_ _ _ _ _ _ _
MAC_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1. Mounting Screw Hole (a 1/4-20 UNC mounting screw less than
5.5 mm (0.22 in.) in length will fit the screw hole)
2. Lens
3
4
5
6
7
8
3. Memory Card Slot Cover
4. 100Base-TX LAN Connector
5. External Device I/O Terminal
6. Audio Input Terminal
7. Reset Switch
8. LED
If Using a Memory Card
e
f
e. Memory Card Slot
f. Reset Switch (see “Operation Guide”)
To remove the memory card, push it in and release it so it pops
out slightly. Grasp the card and remove it.
Important
• Insert a memory card before installing the camera.
• When using a memory card with the camera for the first time, it is
recommended to format the card after inserting it into the camera
(see “Operation Guide”).
External Dimensions
54 (2.13)
13.6 (0.54)
32 (1.26)
114 (4.49)
67 (2.64)
11.4 (0.45)
Unit : mm (in.)
BIE-7019-001
© CANON INC. 2015
Printed in Taiwan
ENGLISH
The contents of this guide are subject to change without any prior
notice.
Please be sure to read the “Safety Precautions” section for
correct use. After reading this Installation Guide, keep it in a
readily accessible location for future reference. This camera is
for indoor use only.
* Some cameras are not sold in some regions.
WARNING
To reduce a risk of fire or electric shock, do not
expose this product
to rain or moisture.
Caution
Request a professional installer for all camera
installation work. Never try to install the camera
yourself. Doing so may result in unforeseen
accidents such as dropping the camera or
electric shock.
Check Included Items
Camera (VB-S900F/VB-S905F)
Warranty Card
Setup CD-ROM
Notice
Installation Guide (This document)