Canon VB-S905F Network Video Recording Software RM Series Administrator Manual - Page 39
Settings After Installation, Windows Firewall Settings
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installation Settings After Installation 2 Configure the following settings after installing this software according to the operating system you are using. Windows Firewall Settings If you install the Storage Server and the Viewer on different computers, you must change the Windows Firewall settings on the computer used for the Storage Server. During installation, select [Add storage server programs to the Windows Firewall exception list. ] to complete settings. If you did not select the above check box during installation, perform the following procedure to change the Windows Firewall settings. The following settings are not required if you install the Storage Server and Viewer onto the same computer. When using Windows 7, Windows 8, Windows Server 2008 R2, or Windows Server 2012 1 Click [System and Security] in the [Control Panel], and then click [Windows Firewall]. 2 Click [Advanced Settings] to display the [Windows Firewall with Advanced Security] window. 3 Click [Inbound Rules] and select [New Rule] from the [Action] menu to start the [New Inbound Rule Wizard]. 4 Click [Port], and then click [Next]. 5 Click [TCP] and [Specific local ports], and then enter 80 as the port number. Then click [Next]. 6 Click [Allow the connection], and then click [Next]. 7 Click [Next]. 8 Enter a name (such as the Storage Server or Storage Server Group name) in [Name] and click [Finish]. 9 The added inbound rule should be displayed in the [Windows Firewall with Advanced Security] window, with a checkmark icon displayed next to the rule. When using Windows Vista or Windows Server 2008 1 Click [Start] > [Control Panel] to open the [Control Panel]. 2 Click [System Security] > [Windows Firewall]. If the [Control Panel] is set to [Classic View], double click [Windows Firewall]. 3 Click [Change settings]. If the [User Account Control] dialog box is displayed, click [Continue]. 4 Click the [Exceptions] tab and click [Add Port]. 5 In the [Add a Port] dialog box, enter the name of the Storage Server and 80 as the port number. Make sure that [TCP] is selected and click [OK]. 39