Canon VB-S905F Network Video Recording Software RM Series Administrator Manual - Page 88
Set the Focus [Focus] Tab, R Gain] and [B Gain]
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
[Off]: Record with infrared lighting disabled. [1] to [7]: Select one of seven strength levels when setting the infrared lighting function manually. (7) [White Balance] Specify the appropriate white balance by selecting one of the camera's light source settings displayed in the list. If [Manual] is selected, use one of the following two methods to adjust the white balance. • [R Gain] and [B Gain] Specify the white balance parameters by dragging the sliders. Drag to the right to increase the gain (the sensitivity to brightness). • [One Shot WB] Force white balance adjustment to a light source. Using a white object (such as a piece of white paper) as a standard, fill the shot with the object and click this button. C300 C50F C50i It may take approximately 30 sec. for [Exposure], [Night Mode] and [White Balance] settings to be reflected in the view after recording starts. Important If you select [Enabled] for Night Mode, you will not be able to set the white balance. If you select [Auto] for Night Mode, however, you will be able to set the white balance, but the settings will be cleared when the camera switches to Night Mode. Note When [Night Mode] is enabled in [Aperture Mode], both the recorded and displayed video is in black and white. Set the Focus ([Focus] Tab) (1) (2) (3) (4) (1) [Not Specified] Record using the existing focal position of the camera. (2) [Auto], [Auto (for domes)] Automatically focus the video. 88