Canon VIXIA HF G21 Instruction Manual - Page 76
Low Cut Filter (MIC Terminal), Audio Mix, Open the [MIC Low Cut] screen.
View all Canon VIXIA HF G21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Recording Audio Low Cut Filter (MIC Terminal) When you are recording using a microphone connected to the MIC terminal, you can activate the low cut filter to reduce the sound of blowing wind, a car's engine and similar ambient sounds. Operating modes: 1 Open the [MIC Low Cut] screen. 76 [FUNC.] > [MENU] > p > [MIC Low Cut] 2 Touch [i On] and then touch [X]. NOTES • When recording in surroundings unaffected by wind or if you want to record low-frequency sounds, we recommend setting [MIC Low Cut] to [j Off]. Audio Mix When recording, you can mix audio from the built-in microphone with external audio from the MIC terminal and adjust the mix balance for original sound effects. The external audio input can be from a commercially available external microphone or from an external audio player (analog Line In). Operating modes: 1 Connect the external audio source to the MIC terminal. 2 Open the [MIC Terminal Input] screen. [FUNC.] > [MENU] > p > [MIC Terminal Input] 3 Touch [Þ External Audio] or [ß Microphone] and then touch [K]. 4 Activate the audio mix. [Audio Mix] > [i On] 5 Adjust the audio mix balance as necessary. • Touch [INT] (more of the sound from the built-in microphone) or [EXT] (more of the sound from the external audio) or drag your finger along the audio mix bar to adjust the mix balance as desired. 6 Touch [X] to set the audio mix and close the menu.