Canon VIXIA HF R800 User Manual - Page 249
No acce, point, found, The acce, not compatible with UPnP, Unable to acce, configuration file
View all Canon VIXIA HF R800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Trouble? No access points found - The access point set in the camcorder could not be found. - To avoid interference, use the camcorder at some distance from devices that emit electromagnetic waves (cordless phones, microwave ovens, etc.). - Make sure that you use the correct access point's network name (SSID) in the camcorder's Wi-Fi settings (A 183). - If the access point is using MAC address filtering, enter the camcorder's MAC address in the access point's configuration screen. The access point is not compatible with UPnP - An access point compatible with UPnP (Universal Plug and Play) was not found in the connected network. You must use an access point compatible with UPnP. If your access point is compatible, make sure UPnP is activated. Unable to access configuration files - Turn off the camcorder. After a short while, turn it on again. If the problem persists contact a Canon Service Center. Unable to complete WPS. - Turn off the camcorder and access point. After a short while, turn them on again and try again. If the problem persists, perform setup using the [Search for Access Points] option (A 180). 249